Ask a Question




Ask a Question


AUDIOENGINE HD3 Active Speaker

The HD3 premium powered speakers are a mini home music system with high-fidelity stereo sound for smaller spaces and desktops.  Stream your music in seconds from any app or device via high-definition Bluetooth.

$510.00 Regular Price $549.00

Warranty Period : 3 years

Sold as : 1 Pair

EVERY APP, EVERY DEVICE

WIRELESS THAT REALLY WORKS

Our most versatile wireless Bluetooth speakers. HD3 Wireless Speakers work with all your apps, music, and devices (even your favorite turntable) so no matter how you listen, HD3 has you covered. The ultimate mini music system with wireless that works. 

Tidal, Spotify, Pandora…all your favorite streaming apps play instantly.

AT A GLANCE

BENEFITS

  • Small speakers with a big sound that fills any room

  • Premium Bluetooth wireless that works with all your devices and apps

  • High-end sound wrapped in hand-built wood cabinets

  • Simple setup, no receiver needed

  • No network setup, no passwords, no hassle

  • No buttons to push & inputs are always ready to go

  • Front panel volume control and headphone jack

SET UP IN SECONDS

NO HASSLE. 

The HD3 Wireless Speakers are small desktop speakers with a surprisingly large sound for their size.

No network setup, passwords to enter, or buttons to push.  Setting up these speakers is so easy you’ll be rocking in no time.

SMALL SPEAKERS, BIG SOUND

SURPRISINGLY LOUD

Don’t let their size fool you as this little speaker is packed with much more sound than you would expect. 

The HD3 Wireless Speakers are constructed with custom Audioengine components:  Kevlar woofers, silk tweeters, Premium Bluetooth aptX-HD, and built-in power amps wrapped in precision-tuned, hand-crafted cabinets. 

Clear, full, and powerful audio that fills almost any room.

GO OLD SCHOOL

ANALOG, BABY!

Audioengine wireless speakers are special. Their built-in analog power amplifiers sound incredible compared to lower-cost digital amps found in other mass-produced brands. 

A whole new audio experience, guaranteed.

What's in the box

  • 1 HD3 Home Music System w/Bluetooth aptX-HD powered (left) speaker

  • 1 HD3 Home Music System w/Bluetooth aptX-HD passive (right) speaker

  • 1 Antenna

  • 1 Quality Gold Plated Banana Plugs

  • 1 Power supply w/ detachable AC cord

  • 1 USB cable

  • 1 Mini-jack audio cable

  • 2 Microfiber speaker bag

  • 2 Microfiber cable bag

  • 1 Setup guide

Specification
General Specifications
TypePowered Bluetooth aptX HD speaker system
Amplifier TypeAB
Rated Power Output15W RMS per channel at 4 ohms
Peak Power Output30W per channel at 4 ohms
Total Peak Power Output60W
Drivers

2.75" Aramid fiber woofers

0.75" Silk dome tweeters

Inputs3.5mm stereo mini jack
RCA L/R
USB
Bluetooth
OutputsRCA Variable line-out, 3.5mm mini jack headphone out
Input Voltages110-240 V 50/60 Hz Auto Switching
SNR>95 dB (typical A-weighted)
THD+NLess than 0.05% at all power settings
Crosstalk<50 dB
Frequency Response65 Hz-22 kHz +/-2 dB
Frequency Response with Bass Reduction Switch100Hz-22kHz +/-2 dB (<5dB down)
Analogue Input ImpedanceN/A
Nominal ImpedanceN/A
Input Impedance5K ohms unbalanced
Crossover FrequencyN/A
ProtectionOutput current limiting, thermal over temperature, power on/off transient protection
Power ConsumptionIdle: 10W
Standby ConsumptionN/A
PhaseN/A
Reccomended Amplifier PowerN/A
Battery LifeN/A
Battery Charge TimeN/A
Bluetooth Specifications
Internal D/A ConverterPCM 5102
Internal BT RecieverN/A
Input Bit Depth24 bit (padded)
Bluetooth Reciever typeBluetooth 5.0
Supported CodecsaptX HD, aptX, AAC, SBC
Supported Bluetooth ProfilesN/A
Wireless Operation RangeUp to 100 ft (30m) typical
Input Data RateDetermined by Bluetooth
Wireless Latency~30 milliseconds (ms)
USB Specifications
Connector TypeMicro-USB
USB Device ClassUSB 1.1 or above
Input Bit Depth24 bit (padded)
Input Sample Rate44.1 kHz/48 kHz
Headphone Amp Specifications
Headphone Amp TypeOPA2134
Full-scale Headphone Output Level2.0 V RMS
Output Impedence2 ohms
Reccomended Headphone Impedance Level10 ohms to 10K ohms
Optical Specifications 
Internal D/A ConverterN/A
Input Bit DepthN/A
Sample RateN/A
Weights and Measures
Dimensions (HxWxD)Each Speaker - 17.8cm x 10.8cm x 14cm
WeightLeft (powered) - 1.8kg
Right (passive) - 1.5 kg
Total Shipping Weight4.6 kg
Shipping Box Dimensions (LxWxH)30cm x 22.5cm x 29.5cm
GENERAL SPECIFICATIONS
Product Type
  • Powered Bluetooth Speaker System
Frequency Response
  • 65Hz - 22kHz ±2.0dB
    • 100Hz - 22kHz ±2.0dB (<5dB down, Bass Reduction selected)
Signal-to-Noise Ratio
  • >95dB (typical, A-weighted)
THD+N
  • <0.05% (all power settings)
Crosstalk
  • <50dB
Protection
  • Output Current Limiting
  • Thermal Over-Temperature Protection
  • Power On/Off Transient Protection
DRIVERS
Woofer
  • 2.75" (70mm) Aramid Fibre Woofer
Tweeter
  • 0.75" (19mm) Silk Dome Tweeter
AMPLIFIER SPECIFICATIONS
Amplifier Type
  • Class AB
Power Output
  • 15W RMS per Channel (4Ω)
  • 30W Peak per Channel (4Ω, AES)
  • 60W Total Peak (AES)
ANALOGUE INPUTS
Analogue Inputs
  • 1 x Stereo RCA Line Input
  • 1 x 3.5mm Stereo Line Input
Input Impedance
  • 5kΩ (unbalanced)
DIGITAL INPUTS
USB Audio Input
  • 1 x Micro-USB
  • USB Device Class 1.1 or Above
  • 24-bit (padded)
  • 44.1kHz
  • 48kHz
Bluetooth
  • Bluetooth 5.0
  • aptX HD
  • aptX
  • AAC
  • SBC
  • Up to 30m Typical Range
  • Approximately 30ms Latency
Digital-to-Analogue Converter
  • PCM5102
  • 24-bit (padded)
OUTPUTS
Analogue Output
  • 1 x Stereo RCA Variable Line Output
HEADPHONE AMP SECTION
Headphone Output
  • 1 x 3.5mm Stereo
Headphone Amplifier
  • OPA2134
Maximum Output Level
  • 2.0Vrms
Output Impedance
Recommended Headphone Impedance
  • 10Ω - 10kΩ
GENERAL SPECIFICATIONS
Power Requirements
  • 110 - 240V AC
  • 50/60Hz
  • Auto-Switching
Power Consumption
  • 10W Idle
DIMENSIONS AND WEIGHT
Dimensions
  • 108mm Width
  • 140mm Depth
  • 178mm Height
Weight
  • 1.8kg (Powered Speaker)
  • 1.5kg (Passive Speaker)