ISOACOUSTICS GAIA III NEO Speaker Isolation Feet (Set of 4)
ISOACOUSTICS GAIA NEO III
Experience improved sonic clarity with GAIA Neo Series speaker isolation feet.
GAIA Neo: elevating audio isolation
The GAIA Neo series is the next evolution in IsoAcoustics’ award-winning line of speaker isolation feet. Building on the proven legacy of the original GAIA models, GAIA Neo introduces a series of advanced upgrades including seamless height adjustment, improved isolation performance, simplified installation, and a sleek modern aesthetic in black or dark chrome.
Designed to replace factory-installed feet or spikes, the GAIA Neo decouples the speaker from the supporting surface to eliminate distortion caused by vibrations and reflections. With GAIA Neo, unlocking the full potential of your audio system is easier than ever before.
Learn more about the difference between the new GAIA Neo and original GAIA isolators >
Height adjustment
The isolator can be raised or lowered by up to 8.5mm (0.34″) without affecting its on-axis alignment. Simply rotate the lower ring to adjust.
Enhanced isolation
The Neo continues to build on IsoAcoustics’ industry leading technology, providing even greater isolation and sonic clarity.
Patented technology. Proven performance.
The GAIA Neo series builds on IsoAcoustics’ patented isolation technology with refinements that take performance even further. The GAIA Neo isolators offer increased isolation effectiveness, reducing internal reflections and mechanical vibrations with greater precision.
The GAIA Neo isolator is directional and designed to be aligned with the speaker’s drivers, helping to resist lateral movement and oscillations while maintaining accurate alignment with the listening position. By decoupling the speaker from its supporting surface, GAIA Neo reveals greater clarity, finer detail, and a more transparent soundstage with enhanced depth and realism.
Available in dark chrome or black
Two exquisite finish options: the deep, reflective sheen of dark chrome, or the timeless, confident presence of black.
Stable contact on uneven floors
Floors are often not perfectly level, and traditional rigid feet can struggle to sit flat. The GAIA Neo uses a bottom isolator that can pivot to maintain full contact with the floor even when the surface is slightly angled. This allows the speaker to remain stable and ensures consistent performance without rocking or compromised support.
Effortless positioning with Floor Sliders
Floor Sliders are the perfect companion for your GAIA Neo isolators, allowing you to easily reposition your speakers or audio equipment after installation. Designed to work directly on carpeted flooring, the sliders can also be used on hard surfaces by applying the included adhesive felt pads.
This dual-surface flexibility ensures smooth movement whether you’re setting up on carpet or solid floors. Simply slide the speakers into place, then tilt one side at a time to remove the sliders once the final position is set.
FAQS
- How has the isolation been improved from the GAIA Neo vs the previous GAIAs?
-
The GAIA Neo builds on the same patented isolation design as the original GAIA series but incorporates refined internal isolators with adjustments to shape, thickness, and durometer. These changes are the result of continued R&D and performance testing. These enhancements deliver improvements in clarity, focus, and low-frequency definition, while the original GAIA models continue to offer excellent performance and remain part of our lineup.
-
- My speakers don’t have threaded feet, can I still use them on the GAIA Neos?
-
No, the GAIA Neo requires a connection with a threaded insert.
Threaded inserts are available at most hardware stores and can be installed in the base of many types of speakers, but this is not typically recommended because of the risk of damaging the speaker.
-
- Is the IsoAcoustics Logo applied on both sides of the GAIA Neo and GAIA-TITAN Neo?
-
Yes, the logo is applied on both sides to make it easier to align the isolators correctly during installation. The O-Ring will compress and allow for aligning the isolators with a strong connection.
-
- How is GAIA Neo different from the original GAIA models?
-
GAIA Neo builds on the original GAIA design with:
- Seamless height adjustment using a rotating lower ring.
- An improved flush-fit design with integrated O-ring (no lock nuts).
- Easier installation.
- Floor-Sliders for simple speaker positioning.
- Available in black and dark chrome finishes.
-
- Which GAIA Neo model will perform best for my speakers?
-
The GAIA Neo model should be selected based on the weight that they are supporting. The weight limits we set are based on the performance curve. The GAIA perform well up to the specified weight limits. We do not recommend exceeding the weight limits of the GAIA Neo’s or TITAN Neo’s.
-
- How is the GAIA Neo Series installed?
-
Install the Threaded Adapter - Choose the correct threaded adapter for your speaker or component and thread it into the bottom of the speaker or component.
-
Attach the GAIA Neo Isolators - Screw each GAIA Neo isolator onto the installed adapter until the O-Ring compresses and the isolator sits firmly against the bottom of the speaker. Align the IsoAcoustics logo to face forward, in line with the front of the speaker.
Note: An optional compression washer is included and is recommended when the O-Ring has limited contact with the speaker base or outrigger
-
Prepare the Floor Sliders - Place the included floor sliders under each GAIA Neo isolator.
- On solid floors: apply the adhesive felt pads to the bottom of the sliders.
- On carpeted floors: use the sliders without felt pads. -
Position the Speaker - carefully slide the speaker into position using the floor sliders.
-
Level and Adjust - Rotate the lower ring on each GAIA Neo to fine-tune the height. This allows you to level the speaker, adjust the focus, and ensure even weight distribution across the isolators.
-
Listen and Fine-Tune Placement - After initial setup, listen to the system and make any needed adjustments to the speaker’s position or isolator height. Once satisfied, tilt the speaker one side at a time to remove the floor sliders.
-
- The weight of my speaker is slightly above the maximum weight. Will the GAIA Neo still perform?
-
We do not recommend exceeding the specified weight limit. The weight limits are set based on the performance curve, not based on how much weight they can support. The performance of the GAIA Neo is still strong at the weight limit, but is quickly declining above this weight.
-
- How do I determine what the thread size is for my speaker?
-
Please click herefor information on thread sizes and instructions on how to determine the thread size for your speaker or subwoofer.
-
- Can the GAIA Series be used on stand mounted speakers?
-
If the speakers are fastened to the stands, then they tend to act as one and the GAIA Neo series are recommended for installation on the floor stand.
If the speakers are resting on top of the stands, then we recommend isolation between the speaker and the stand. The OREA series are a great option in this case.
-
|
| ||||||||||||||||||||
Please complete your information below to login.
Sign In
Create New Account