REGA 2mm 3 Point Tonearm Spacer

When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our Rega arm spacers to achieve the correct arm height.

Note: On Rega turntables, spacers should not be necessary unless you are you using an exceptionally deep-bodied cartridge from another manufacturer. Using a Denon DL103-R for example would not require one. An Ortofon 2M cartridge (especially the black) will benefit from a spacer. An Ortofon Quintet cartridge may require multiple spacers to work at all due to the cartridges deep and squared off body.

Arm height or V.T.A adjustment can be a controversial subject. Rega believes that the integrity of the arm fixing onto the arm mounting board is much more important than the questionable facility of arm adjustment. The arm should be reasonably parallel to the record surface or slightly lower at the mounting. The only time a spacer is necessary to raise the arm height is if the rear of a cartridge is hitting the record whilst playing.

Suits the following tonearms:

• RB110
• RB220
• RB303
• RB330