DENON DL 110 EM RED High Output Moving Coil Cartridge
Move your mouse over image or click to enlarge
DENON DL 110 EM RED High Output Moving Coil Cartridge DENON DL 110 EM RED High Output Moving Coil Cartridge DENON DL 110 EM RED High Output Moving Coil Cartridge

Ask a Question







Ask a Question


DENON DL 103 R EM Moving Coil Cartridge

DENON DL 103 R EM Moving Coil Cartridge

ROTEL RB 1590 Stereo Power Amplifier

ROTEL RB 1590 Stereo Power Amplifier

DENON DL 110 EM RED High Output Moving Coil Cartridge

The Denon DL phono cartridge was designed to enable more people to enjoy the exquisite sound quality of moving coil (MC) cartridges.

$499.00
SKU
DENONDL110EM

Developed using Denon's state of the art MC cartridge manufacturing know how, the Denon DL 110 DL110 is a moving coil cartridge capable of producing a high output of 1.6 mV which is equivalent to the output of Moving Magnet (MM) phono cartridges. The Denon DL 110 phono cartridge can thus be directly connected the MM phono input of your amplifier or receiver without the need for a step up transformer, head amplifier or pre preamp.

The DL110 phono cartridge uses a special elliptical stylus with a rectangular cross section of 0.1 x 0.2 mm. It reaches deep into the record groove to extract detail while bypassing groove wall beaten and shorn by age, misuse and misalignment. You'll probably be surprised by how quiet your LPs sound.

Proper setup is very important with the Denon DL 110 phono cartridge. Take the time to get it right and you'll be rewarded with its naturally sweet tonal balance, ambience, quick transient response, and exquisite articulation.

If you've been wondering why many have been captivated by moving coils, the Denon DL 110 will offer you many positive reasons why.

  • High Output Voltage
  • One Point Suspension System
  • Light-Weight armature assembly
  • Double construction cantilever

Generating method: moving coil

Output voltage: 1.6mV

L/R sensitivity: within 1dB

L/R separation: more than 25dB

Electrical impedance: 160 ohms

Stylus tip: 0.1 x 0.2mm special elliptical diamond

Stylus force: 1.8g (+-0.3g)

Frequency range: 20Hz to 45kHz

Weight: 4.8g

Load resistance: more than 47kOhms

Principle

  • Moving Coil, High Output (Use MM Phono Pre-amp)

Output voltage

  • 1.6mV

L/R sensitivity

  • within 1dB

L/R separation

  • more than 25dB

Electrical impedance

  • 160 ohms

Stylus tip

  • 0.1 x 0.2mm special elliptical diamond

Stylus force

  • 1.5g - 2.1g

Frequency range

  • 20Hz to 45kHz

Weight

  • 4.8g

Load resistance

  • more than 47kOhms

More from this brand