We will be closed Good Friday(29/3), Easter Sunday(31/3) and Easter Monday(1/4).
HAPPY EASTER

Ask a Question




Ask a Question


PRO-JECT T1 Phono SB Turntable

New Generation Audiophile Entry Level Turntable. Built-in Phono Stage & Electronic Speed Switch – Made in Europe!

$719.00 Regular Price $799.00

The Chassis

The plinth supporting the Pro-Ject T1 Phono SB is created using precision CNC routing, meaning there are no hollow spaces, as well as no plastic pieces, commonly found in entry-level turntables, resulting in avoidance of unwanted vibrations. The turntable is available in a stylish Piano Black finish, plus newly released in Australia in White and Walnut.

The Motor & Sub-Platter

In the T1, the motor drives a flat belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. Resulting in reduced feedback from the bearing when compared to other turntables, and also the added advantage of not having to fiddle with the belt once it's in place!

The Tonearm & Cartridge

The Pro-Ject T1 Phono SB has a straight, 8,6" tonearn with a stiff aluminium construction. This one-piece tonearm also features low-friction bearings for absolute accuracy in use. Besides the clean and stylish looks, the integrated head shell won't cause any vibrations either, a big upgrade from the common screwed or glued-on head shells you normally see in turntables at this price point. The Pro-Ject T1 Phono SB comes pre-fitted with an Ortofon OM5e moving magnet cartridge, which features an elliptical diamond stylus tip for accurate playback and a pre-weighted counter weight. Meaning it is ready to play, straight out of the box! No adjustents, no need to balance the tonearm.

Switchable Phono Stage On-Board

The Pro-Ject T1 Phono SB includes an on-board switchable moving magnet phono stage. This means that the turntable is ready-to-go out of the box, but also has the flexibility for the customer to upgrade their phono stage in the future. This could be a seperate phono stage, or an in-built phono in their existing amplifier.

Push Button Speed Control

To make it as easy as possible for customers to get started with the Pro-Ject T1 Phono SB an electronic speed control is integrated into the turntable - activated with a simple switch on the front-left of the plinth. This allows easy switching between the two most common speed formats, 33 and 45 RPM.

Heavy Glass Platter

The Pro-Ject T1 Phono SB is supplied with a heavy, low-resonance glass platter. A significant upgrade from plastic or lightweight steel alternatives, this new platter both looks stylish & provides the consistent speed that your vinyl needs to sound its best.

The Complete Entry-Level Turntable

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM  5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

Features
  • European-made from the ground up, delivering exceptional build quality.
  • Built-in switchable phono stage - no external phono preamp required
  • Anti-resonant sub-platter design
  • Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
  • Ortofon OM5e moving magnet pickupLow friction, vibration free tonearm bearing
  • One-piece tonearm design with integrated headshell
  • Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
  • Vibration absorbing feet
  • Elegant dustcover with adjustable hinges
  • Precision belt-drive with accurately regulated speed stability
  • Electronic 33/45 RPM speed change
  • Built-in switchable phono stage
  • 8.6" highly precise and light aluminium tonearm, pre-weighted and ready to go out of the box
  • Heavy 8mm thick, low-resonance glass platter
  • Pre-fitted Ortofon OM5e Moving Magnet Cartridge
Specification

Speed (Electronic speed change)

  • 33RPM
  • 45RPM

Principle

  • Belt drive

Speed variance

  • 33RPM: 0.7%
  • 45RPM: 0.6%

Wow & Flutter

  • 33RPM: 0.25%
  • 45RPM: 0.23%

Platter

  • Heavy 8mm, blasted-glass platter with felt mat

Main bearing

  • Stainless steel/brass

Signal to noise

  • 65dB

Tonearm

  • 8.6” aluminium

Effective arm length

  • 218.5 mm

Overhang

  • 22.0 mm

Effective tonearm mass

  • 8.0 g

Counterweight for mass

  • 5 - 10g (pre-mounted)

Tracking force range

  • 0 - 50mN (17.5 mN pre-adjusted)

Outputs

  • RCA Phono/Line (switchable)

Included accessories

  • dustcover
  • felt mat
  • high quality Connect it E RCA Phono cable

Built-in Power Supply

  • 110 - 240V/50, 60Hz; 15 V DC 800mA

Power consumption

  • 4.5 Watt max

Dimensions

  • 415mm Width
  • 100mm Height
  • 335mm Depth

Weight

  • 3.8 kg net

More from this brand